Serving the Aviation Industry since 1973
X
ENVIRONMENT-RESISTANT WITH PRO-INSTALLED GROUND LEADS MIL-S-83519/2

For silver or tin plated shield termination applications on wire with insulation material rated at 125C & above.

For continuous operation from -55C to +150C. These termination sleeves consist of a heat-shrinkable, transparent, polyvinylidene fluoride sleeve with an inner, pre-fluxed solder perform & two thermoplastic sealing inserts. In addition, have a permanent identification number marked on the part. When heat is applied, the solder melts & flows to provide a superior connection between the ground lead & the shield. At the same time, the two thermoplastic sealing inserts melt & the outer sleeve shrinks to provide an environmentally protected termination.
COMBINED DIAMETERS
AS SUPPLIED JACKET SHIELD GROUND
P/N MFG P/N A B L O.D. MAX O.D. MIN LEAD GAUGE
Order
 M83519/2-1 H-ML-1 .075 .105 .650 .105 .035 20
Order
 M83519/2-2 H-ML-2 .105 .145 .650 .145 .055 20
Order
 M83519/2-3 H-ML-3 .170 .200 .650 .200 .085 20
Order
 M83519/2-4 H-ML-4 .235 .255 .750 .255 .130 20
Order
 M83519/2-5 H-ML-5 .275 .300 .750 .300 .170 20
Order
 M83519/2-6 H-ML-6 .075 .105 .650 .105 .035 22
Order
 M83519/2-7 H-ML-7 .105 .145 .650 .145 .055 22
Order
 M83519/2-8 H-ML-8 .170 .200 .650 .200 .085 22
Order
 M83519/2-9 H-ML-9 .235 .255 .750 .255 .130 22
Order
 M83519/2-10 H-ML-10 .275 .300 .750 .300 .170 22
Order
 M83519/2-11 H-ML-11 .075 .105 .650 .105 .035 24
Order
 M83519/2-12 H-ML-12 .105 .145 .650 .145 .055 24
Order
 M83519/2-13 H-ML-13 .170 .200 .650 .200 .085 24
Order
 M83519/2-14 H-ML-14 .235 .255 .750 .255 .130 24
Order
 M83519/2-15 H-ML-15 .275 .300 .750 .300 .170 24
Order
 M83519/2-16 H-ML-16 .075 .105 .650 .105 .035 26
Order
 M83519/2-17 H-ML-17 .105 .145 .650 .145 .055 26
Order
 M83519/2-18 H-ML-18 .170 .200 .650 .200 .085 26
Order
 M83519/2-19 H-ML-19 .235 .255 .750 .255 .130 26
Order
 M83519/2-20 H-ML-20 .275 .300 .750 .300 .170 26