Dallas Avionics, Inc. Install Catalog

Crimp Tools & Dies

AMPHENOL RF CRIMP TOOL

Order

P/N 47-10070

Ratcheting Hand Crimp Frame with Dies firmy affixed in tool

Dimensions 0.068, 0.213, 0.255
Coax Cable Type: RG55, RG58, RG59, RG62, RG141, RG142, RG233, RG303, RG400, RG8X, LMR195, RG200, RG240

SARGENT CRIMP TOOL

Order

P/N 3137CT

Butt splice, commercial grade Crimp Tool

Crimps are indentor type & conform to O.E.M. specifications
Crimps are produced in three cavities: 26-20 AWG (Red), 20-16 AWG (Blue), 16-12 AWG (Yellow)
A built-in locator properly orients the butt splice during crimping
Crimps commercial grade butt splices: Raychem D-4326-36; D-4326-37; D-4326-38
Meets Mil Spec M22520/37-01

SARGENT SUPER CRIMP TOOL

Order

P/N 4140CT

Crimp tool for insulated terminals & splices

Crimps conductor & strain relief portion of insulated terminals & splices in one tool closure
Crimps are produced in three cavities: Red 22-16 AWG, Blue 16-14 AWG & Yellow 12-10 AWG
Red & blue cavities produce inspection dimples
A multi-purpose frame manufactured to exacting specifications to accept interchangeable dies
Molded grips & an easy reach frame to minimize user fatigue
Reamed bearing holes, centerless ground pivots & heat treated working components
Positive ratcheting assembly with emergency release
Conservatively rated tool life of 50,000 cycles
Crimps that meet or exceed U.L. tensile

HX4 OPEN FRAME CRIMP TOOL

Order

P/N M22520/5-01

Features a system of interchangeable dies which eliminate the need for separate fixed die crimp tools for every different application
Crimping dies are snapped into the tool frame & retained in place by internal spring clips
Equipped with a positive ratchet assembly which controls complete handle movement in both directions

GMT232 GENERAL PURPOSE HAND CRIMP TOOL FOR RAYCHEM SPLICES

Order

P/N M22520/37-01

For M81824/1, /6- /10, /11, /13, & /14 Environmental Splices
Crimps low profile environmental splices (M81824/1)
Covers range of 12 (yellow), 16 (blue), & 20 (red) splices for low profile environmental splice applications
Locator configured to hold splice in the correct location while either wire is being terminated
Gaged with G411 (M22520/39-01) 3-step GO/NO GO gage
Rugged construction assures long life cycle

AF8 STANDARD ADJUSTABLE INDENT CRIMP TOOL

Order

P/N M22520/1-01

Accomodates 12-26 AWG
Standard 8 impression crimp assures maximum tensile strength with almost every closed barrel contact
Compatible with Daniels single & multiple position turret heads
Dimensions: 9.75 x 2.5 x 1.25 in, Weight: 1.25 lb
Qualified to MIL-DTL-22520/1

AFM8 STANDARD ADJUSTABLE INDENT CRIMP TOOL

Order

P/N M22520/2-01

Designed for most of the miniature & sub-miniature connector types that are so widely used in electronic systems
Accommodates 20-32 AWG
Gives a Mil-Standard 8 impression crimp, which assures maximum tensile strength
Built-in 8 step selector knob for ease in dialing the correct crimp depth setting for the wire being used
Qualified to MIL-DTL-22520/2

PRO-CRIMPER III HAND CRIMPING TOOL WITH DIE ASSEMBLY

Order

P/N 58433-3

Full crimping capability with a stationary jaw & handle, a moving jaw & handle & an adjustable ratchet
Tool frame holds the die assembly
Die assembly consists of an anvil & indenter
Three crimping chambers are formed when closed
Indenter color coded to correspond with color of terminal insulation (red, blue, or yellow)

PRO-CRIMPER III HAND CRIMPING TOOL WITH DIE ASSEMBLY

Order

P/N 58495-1

Consists of Die Assembly 58495-2 & PRO-CRIMPER III Hand Crimping Tool Frame 354940-1
Suitable for 24-20 AWG Cable Size
Die assembly consists of crimping dies & locator assembly

T-HEAD CRIMP TOOL

Order

P/N 59250