Serving the Aviation Industry since 1973
Print Page
PSAIR22N 600W 2-HORN LOUD SPEAKER
(DAI Part# PSAIR22N)
The PSAIR22N with its sleek, aerodynamic hexagon enclosure that reduces weight, drag, surface area and the vertical clearance required for mounting. As the next iteration of the most popular 600-watt PA for mid-sized helicopters and fixed-wing aircraft, the PSAIR22N raises the bar for putting effective, high-powered, clear speech projection into the smallest, lightest, most compact airborne package possible.

The PSAIR22N hexagon enclosure has two connectors. The "Power" connector will be attached to 28VDC either at the aircraft power buss (usu. via ring terminal) or an auxiliary battery pack. The "Remote" connector will attach to the Remote Control Unit (PSRCU) or to a suitable cockpit audio panel such as the Technisonic A790.

Law Enforcement
Crowd & Traffic Control
Event Security
Emergency Management
Power Outage Response
Fire Fighting
Search and Rescue
Border Control
Beach & Park Safety
Coastal & Harbor Security
Drug Interdiction
Avalanche Control
Military Operations
Special Ops & PysOps

More Documents...
PSAIR22NOur standard configuration. Enclosure includes a 600-watt amplifier.
PSAIR22NPPower-Boosted configuration. Enclosure includes 600-watt amplifier and a 5V DC-DC converter. Recommended whenever power cable run length exceeds 15'.
PSAIR22NRRemote Control configuration. Enclosure includes 600-watt amplifier and a built-in remote control board that can be integrated with certain existing cockpit audio panels such as the Technisonic A710, A711 & A711L without the need for a separate PA controller.
PSAIR22NSSpeaker-Only configuration. Enclosure does not house any electronic components other than the 4 speaker drivers. Allows easier upgrade from older ineffective speaker arrays installed.
Similar Items
PSAIR22NR - POWER SONIX 600 WATT DUAL HORN AERODYNAMIC AMPLIFIED W/REMOTE
PSAIR22NP - POWER SONIX 800W PEAK DUALHORN AERODYNAMIC AMPLIFIED ARRAY
SPECIFICATIONS
ACCESSORIES
Specifications PSAIR12 PSAIR12+1 PSAIR22N PSAIR42N
Distance @70 db .75 miles .75 miles 1 mile 1.25 miles
SPL @ 1m 135 dB 135 dB/pr 138 dB 141 dB
Number of Speakers 1 2 Seperate 2 4
Power Ouput 300W RMS 600W RMS 600W RMS 1200W RMS
Pre-Amp
150 OHM Imput Impedance (All Systems)
Frequency Response
400 to 4500 Hertz (All Systems)
Harmonic Distortion
1% (All Systems)
Sensitivity
1 Volt RMS @ Khertz (All Systems)
DC Voltage
24-32 Volts DC
Peak Current Shutdown
35 Amperes RMS
Max space requirement for speaker array
13.25" x 9.75" x 15.25"
33.7 cm x 24.8 cm x 38.8 cm
13.75" x
9.75" x
12.75"
34.93 cm x
24.77 cm x
32.39 cm
13.25" x
9.75" x
15.25"
33.7 cm x
24.8 cm x
38.8 cm
Amplified Speaker Weight 14 lbs.
6.4 Kg
27 lbs.
12.2 Kg
26 lbs.
10.89 Kg
47 lbs.
21.4 Kg
Temperature Range
-40°F to +140°F
PSBCU Remote Control Unit, houses On/Off, recorder, siren signals & battery microphone input
PSBAT28 28 Volt NiCad Battery Pack, 24 cell
PSBAT28SCU 28 Volt NiCad Battery Pack with State of Charge Unit
PSCHARGE28 Charges 28 Volt battery, constant current 2 Amp charge, automatic 2-state charger and trickle charge, input 120/240 VAC, 50-60 Hertz
PSACDC AC to DC power supply converter
PSMIC Shure, noise-canceling microphone, 150 ohms independence
PSCBL-AC-10 10' power cable from AC converter to amplified speaker
PSCBL-DC-10 10' power cable from DC power buss to amplified speaker
PSCBL-BAT-10 10' power cable from battery to amplified speaker
PSCBL-RCU-10 10' remote control to amplified speaker cable