Searching for Sandia Aerospace
26 Web Page(s) Found
|
 | SR263 - Sandia Aerospace MARC 70 Switching Solution Module
DAI Part# 305001-01
The SR 263 uses two, six pole hermetically sealed and gas filled relays to provide a total of twelve poles of switching. Relays are qualified to MIL-R-39016/40. |
|
 | SR623 - Sandia Aerospace MARC 70 Switching Solution Module
DAI Part# 305002-01
The SR 623 uses six, two pole hermetically sealed, gas filled relays to provide a total of twelve poles of switching. Relays are qualified to MIL-R-39016/6. |
|
 | SA 24 - Sandia Aerospace MARC 70 23 Diode Isolation Lines module
DAI Part# 305003-01
The SANDIA aerospace SA 24 provides the installer with 23 lines of diode isolation in a convenient and versatile package. Each line provides isolation and all 23 lines can be grounded simultaneously by an internal FET for indicator testing. The test circuit can be activated by either a grounded control line or by a 28 Vdc pull-up. The SA 24 can be installed in the SANDIA aerospace SR- 1 single m... |
|
 | SA 15 - Sandia Aerospace MARC 70 Logic Lows to Highs / Highs to Lows module
DAI Part# 305004-01
SANDIA aerospace's SA 15 converts Logic Highs to Logic Lows and Logic Lows to Logic Highs, allowing avionics engineers to use common annunciator drive power. The SA 15 uses two darlington arrays that allow up to 14 logic signals to be inverted (seven per array). Input logic levels can be either 28 VDC or 5 VDC or any combination of the two. Two ground inputs are provided (one per array) for annunc... |
|
 | SA3/SA 3L - Sandia Aerospace MARC 70 LED annunciators module
DAI Part# 305005-01
SANDIA Aerospace's SA 3 and SA 3L provide the installer with a regulated voltage to drive external annunciator lamps when installing new avionics and accessory equipment. Designed to provide up to 12 outputs, the installer can adjust both the maximum and minimum brightness to match the existing annunciators lamps. The SA 3and SA 3L are single circuit card which can be installed in SANDIA Aerospace... |
|
 | SRU 10 - Sandia Aerospace MARC 70 Switching Solution Ten Module Enclosure
DAI Part# 305014-00
MARC70 Interface Modules provide the avionics installer with simple, PMA Approved installation solutions. SANDIA Aerospace Modules are ideal where reliability is a must such as in Navigation System, GPWS, TAWS and RVSM installations. Each module can be installed in either a SRU-1, SRU-5 or SRU-10 enclosure, maximizing installation flexibility. These interface modules can be combined together in a ... |
|
 | SRU 5 - Sandia Aerospace MARC 70 Switching Solution Five Module Enclosure
DAI Part# 305018-00
MARC70 Interface Modules provide the avionics installer with simple, PMA Approved installation solutions. SANDIA Aerospace Modules are ideal where reliability is a must such as in Navigation System, GPWS, TAWS and RVSM installations. Each module can be installed in either a SRU-1, SRU-5 or SRU-10 enclosure, maximizing installation flexibility. These interface modules can be combined together in a ... |
|
 | SRU 1 - Sandia Aerospace MARC 70 Switching Solution Single Module Enclosure
DAI Part# 305146-00
MARC70 Interface Modules provide the avionics installer with simple, PMA Approved installation solutions. SANDIA Aerospace Modules are ideal where reliability is a must such as in Navigation System, GPWS, TAWS and RVSM installations. Each module can be installed in either a SRU-1, SRU-5 or SRU-10 enclosure, maximizing installation flexibility. These interface modules can be combined together in a ... |
|
 | SAFE 328 - Sandia Aerospace SAFE 328 Cooling Fan
DAI Part# 305467-00
The SAFE 328 simultaneously cool up to three avionics units. The SAFE 328 supply up to 20 CFM (no load) of cooling air. Helping maintain your avionics at a proper operating temperature.The SAFE 328 provides an alert output should the blower RPM drop below a preset level. SANDIA Aerospace cooling fans use high quality, brushless blower motors and or RunQuiet technology. The SAFE 328 unit is FAA PM... |
|
 | SAFE 128 - Sandia Aerospace SAFE 128 Cooling Fan
DAI Part# 305468-00
The SAFE 128 is an axial fan that is designed to attach directly to an avionics unit's cooling port. Providing a nominal 20 CFM (no load) of cooling air. The SAFE 128 provides an alert output whenever the fan RPM drops below a preset level. SANDIA Aerospace cooling fans use high quality, brushless blower motors and or RunQuiet technology. The SAFE128 unit is FAA PMA and have passed stringent envir... |
|
 | SR64-1 - Sandia Aerospace MARC 70 Switching Solution Module
DAI Part# 306112-00
The SR64-1 has six, four-pole relays to provide a total of 24 lines of switching. This multi-purpose switching unit has its relays arranged in a group of four (16 poles) and two single relays (4 poles each). |
|
 | SAFE 528 - Sandia Aerospace SAFE 528 Cooling Fan
DAI Part# 305722-00
The SAFE 528 will simultaneously cool up to Five avionics units. The SAFE 528 supply up to 20 CFM (no load), helping maintain your avionics at a proper operating temperature. SANDIA Aerospace cooling fans use high quality, brush-less blower motors and or RunQuiet technology. The SAFE 528 unit have passed stringent environmental testing to ensure years of reliable service. |
|
 | SR34-1 - Sandia Aerospace MARC 70 Switching Solution Module
DAI Part# 306110-00
For installations where price is the major consideration, SANDIA aerospace offers three cost effective, yet reliable switching solutions. The SR24, SR34 and SR64 use sealed, bifurcated relays that provide a high degree of reliability and self clean each time the contacts are exercised. The gold contacts have a life expectancy of 500 thousand operations at 2A/30VDC or 2 million operations at 1A/30V... |
|
 | SR54-1 - Sandia Aerospace MARC 70 Switching Solution Module
DAI Part# 306111-00
The SR 54-1 provides 20 poles of switching through five, hermetically sealed, bifurcated relays.The SR 54 has a built in circuit that switches all relays to their e-energized condition whenever K6 is activated. This can be used for such applications as insuring LOC is presented on the HSI whenever a LOC signal is selected. The relays contacts are gold plated and have a 2 amp restive load rating at... |
|
 | AIS200B-35 - Sandia Aerospace Switching Relay
DAI Part# 306433-00
The AIS200A-35 is a multi-purpose switching unit. The twenty poles of switching allows all the resolver lines and the steering lines to be switched simultaneously. Internal fail safe switching circuitry ensures that ILS steering is always displayed on the indicator should power be lost to the system or if an ILS frequency is selected in the NAV receiver. Annunciator outputs advise the pilot which... |
|
 | AIS240B-35 - Sandia Aerospace Switching Relay
DAI Part# 306434-00
AIS240A-35 is a multi-purpose switching unit, consisting of six, four pole relays for a total of 24 poles of switching capabilities. The relays are arranged in a group of four (16 poles) and two single relays (4 poles each). The relays can be activated by either a ground or 28 Vdc, maximizing installation flexibility. As with our whole family of AIS switching units, the AIS240A-35 uses gold plated... |
|
 | SAE5-35 - Sandia Aerospace Altitude Data System
DAI Part# 705154-00
The SAE5-35 has set a new standard in altitude reporting equipment. It provides pilot features never before offered in an altitude encoder, and by combining all your altitude encoding needs in a single unit, cost is reduced and system reliability increased. 100' resolution grey code output for transponder interface Dual RS232 output with 10' resolution Exclusive altitude in... |
|
 | SAC7-35 - Sandia Aerospace Air Data Computer
DAI Part# 705548-00
The SAC 7-35 is four systems in one: Altitude Encoder. The SAC 7-35 is FAA TSO Approved as an altitude encoder. It provides standard Gillham Grey code for legacy transponders and RS-232 data for the new generations of transponders. Altitude Alerting. The SAC 7-35 has SANDIA Aerospace's exclusive AIM (Altitude Inflight Monitoring) that alerts the pilot anytime he deviat... |
|
 | ST26 - Sandia Aerospace Tach Generator Adapter
DAI Part# 705662-00
The ST 26 is a Tach Generator Adapter that converts sinusoidal, 26vac - 400hz output of the Turbine Engine Tach Generators to a digital signal. This TSO approved adapter can be used for aircraft instrument displays or for other control ? data collection systems. The ST 26 is approved to work with the most common aircraft tachometers models. |
|
 | STX165R - Sandia Aerospace Mode C Transponder Remote Unit
DAI Part# 705831-00
A New Standard In Transponders The STX 165 and STX 165R elevate transponder capability to a new level while reducing both weight and size. The solid state transmitter design provides 200 Watts nominal output with no warm up time. And because it's all solid state, power requirements are at an absolute minimum. STX 165R will accept either Gillham Gray Code or RS-232 altitude input for Mode... |
|
 | STX165 - Sandia Aerospace Mode C Transponder Panel Mount
DAI Part# 705832-00
A New Standard In Transponders The STX 165 and STX 165R elevate transponder capability to a new level while reducing both weight and size. The solid state transmitter design provides 200 Watts nominal output with no warm up time. And because it's all solid state, power requirements are at an absolute minimum. STX 165 is a panel mount unit that uses a 1/2 3ATI panel cutout. Behind the pane... |
|
 | SAI 340 - Sandia Aerospace SAI 340 Quattro
DAI Part# 706171-20
SAI 340 Quattro is Four-In-One standby instrument that gives you precision Airspeed, Attitude, Altitude and Slip indications, all in an easy to read EFIS presentation. The Quattro can serve as a cost effective replacement for steam-gauge standby instruments in retrofit EFIS equipped aircraft, providing for a more consistent user interface during emergency operations. It can also be an excellent ... |
|
 | STX360 - Sandia Aerospace STX360 Sentinel UAT ADS-B In and Out Mode C Transponder
DAI Part# 706430-00
The STX 360 Sentinel is a UAT ADS-B unit with a built-in Mode A/C transponder. The STX 360 can easily be installed in the same space as an existing transponder, simplifying the installation. The STX 360 has an internal diplexer that allows both the transponder and the UAT to share a single antenna. Because it is a combination unit, there is a single point of entry for the squawk code which elimina... |
|
 | ACF314 - Sandia Aerospace 3 Port Fan
DAI Part# ACF314
Designed to give you superior performance and long life, up to 78,000 hours of continuous operation. You have selected the best avionics for your aircraft, now select the best coolingfan to protect them. | ACF328 - Sandia Aerospace 3 Port Fan
DAI Part# ACF328
Designed to give you superior performance and long life, up to 78,000 hours of continuous operation. You have selected the best avionics for your aircraft, now select the best coolingfan to protect them. |
|
 | ACF528 - Sandia Aerospace 5 Port Fan
DAI Part# ACF528
Designed to give you superior performance and long life, up to 78,000 hours of continuous operation. You have selected the best avionics for your aircraft, now select the best coolingfan to protect them. |
|
|
|
|
| |
